12/4/2023 0 Comments Elgato internal capture cardMicro SD Supported formats: FAT32 format / exFAT format.Micro SD maximum capacity support: 128GB.Micro SD Class 10 card is required for PC-Free recording, Micro SD card is not included.LGP2 PLUS does not support viewing/recording/streaming of HDCP protected signals.Record Format: MPEG 4 (H.264+AAC) / MJPEG / Supports hardware encoding.Operation Modes: PC mode, PC-free mode, Card reader mode.Max Pass-Through Resolutions: 4Kp60 / 1080p60.Audio Output (Pass-Through): HDMI 2.0 / 4 Pole 3.5mm Jack ( Audio pass-through from controller, Mic input)*1.Audio Input: HDMI 2.0 / 4 Pole 3.5mm Jack ( Audio input from controller, Mic pass-through)*1.If the display EDID has defines resolution or frame rate not supported by the capture card, the capture device signal may appear incorrect or not at all. Recommended for : Use this setting if the Merged EDID mode is causing image issues with the attached display. This mode copies the EDID of the display connected to the capture card output onto the capture card. If the internal EDID defines resolution or frame rate not supported by the attached display, it may result in the display showing a black screen, an error message, or no signal. If the gaming monitor is 1080p, select the 1080p EDID.Ĭustom EDID files are supported by choosing the Custom option from the dropdown menu.If the gaming monitor is 1440p, select the 1440p EDID.When using a dual-PC setup, the suggested setup is to used the EDID file that corresponds to the main gaming monitor resolution This setting will select the EDID to use in the Internal mode. Recommended for : Dual-PC capture setup where only the HDMI input of the capture card is used and the HDMI output is unused. In this mode the connected TV/Monitor capabilities are ignored. This mode sets the EDID of the capture device to the file defined by EDID (Internal) setting. Recommended for : Typical console capture setup where a TV or monitor is connected to the capture card HDMI output. This mode combines the EDID of the connected TV/Monitor and the capabilities of the capture device to create an optimized EDID. This setting comes into effect only when the Input EDID mode is set to Internal. This is also where custom EDID files can be used. Select the EDID file that the Internal EDID mode will use. This setting will change the capture devices' EDID mode.ĮDID modes include: Merged, Display, Internal The EDID settings are located in the 4K Capture Utility settings. These devices can have their EDID setting changed: The EDID is transmitted from the display device to the device that is connected to the display such as a console or computer so that the console or computers knows what resolutions, frame rates, etc it can send the display. The EDID file contains information about the type of signal the device (TV/Monitor) can accept, such as resolution, frame rate, HDR format, bit depth, audio, (Stereo, multi-channel), and much more. This article will go over how to change the EDID setting, what the EDID modes do, and recommended settings.Ĭhanging EDID settings is supported only in 4K Capture Utility on Windows.ĮDID (Extended Display Identification Data) is a small configuration file that is stored on devices that take in video signals such as TVs, monitors, and capture cards. Some Elgato devices have the ability to have their EDID settings changed.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |